Common sense of national standard sanitary ceramics: what is fire cracking?

First of all, let's talk about the classification of ceramics, which are divided into: daily-use ceramics, artistic ceramics, sanitary ceramics, architectural ceramics, etc. We mainly talk about sanitary ceramics. LORY sanitary ceramics products are of high quality and conform to the "Sanitary Ceramics The qualified product of the national standard GB 6952-2005 ",has the characteristics of high cost performance.

2023.05.31

Production process flow of ceramic sanitary ware

Characteristics of ceramics: 1.Heating at a high temperature of 1280 degrees Celsius makes the product truly fully ceramic, possessing the advantages of high temperature resistance, wear resistance, and non water absorption. 2 imported special glaze formula, with a smooth and delicate glaze surface, wear-resistant surface, good stain resistance, and easy to clean. 3. Long term use to ensure that it is as new as new.   Introduction to the process of ceramic sanitary ware products: 1) Raw materials for ceramic production Divided into porcelain clay and glaze, they contain basically the same raw materials, but have different raw material ratios. Its main components include feldspar, quartz, iron oxide, zirconia, aluminum powder, magnesium oxide, and pigments. K2O SiO2 ZnO ZrO2 AL2O3 MgO Clay: A type of clay used in the production of pottery and porcelain, abbreviated as clay. Porcelain: Finished product that is completely vitrified into porcelain during high-temperature firing. Pottery: Finished product that cannot be fully vitrified into porcelain during high-temperature firing. The difference between porcelain and pottery: raw material formula, product water absorption, and firing temperature. Grout: The raw material used for forming grouting. Glaze: The raw material used for spraying glaze on semi-finished products. Production process: ball milling,...

2023.05.30

Wall mounted toilet installation

In recent years, wall mounted toilets have become a new favorite of bathroom fixtures due to their convenient cleaning, strong applicability, and safety under heavy loads. Subsequently, there is a strong demand for common knowledge in the installation of wall mounted toilets. This article mainly introduces the installation steps, dimensions, height, and pictures of wall hung toilets.

2023.05.29

1 minute to learn how to make a toilet

The commonly known water closet is also called a toilet, also known as sanitary ceramics. How was it produced from a pile of porcelain clay. 1. Mud pairing: one input of soil for slurry mixing The ceramic soil used for toilet firing is mixed with quartz, clay, feldspar, etc. It is first ball milled and mechanically stirred to form a uniform slurry, and then transported to the production workshop through high-pressure pipelines for the next step of production - grouting.

2023.05.26

5 tips for choosing a toilet

Water leakage in the toilet water storage tank is usually not easy to detect except for the obvious dripping sound. A simple inspection method is to drop blue ink in the toilet water tank, stir well and see if there is blue water flowing out of the water outlet of the toilet. If there is, it means that the toilet is leaking The place. As a reminder, it is best to choose a water tank with a higher height, so that the momentum is very good.

2023.05.25

Technical method of grouting molding for sanitary ware ceramics

Section 1:Sanitary ware ceramics grouting method:1.Hollow grouting (single-sided grouting) The plaster molds used in this method have no cores. During operation, after a certain period of time after the mud is filled with the model, the inner wall of the model adheres to a green body with a certain thickness. Then the excess mud is poured out, and the shape of the green body is fixed in the model. This method is suitable for casting small and thin-walled products, such as ceramic crucibles, vases, pipe fittings, cups, pots, etc. The density of mud used for hollow grouting is small, generally 1.65-1.8g/cm3, otherwise there will be mud wisps and roughness on the surface of the green body after pouring.

2023.05.24