Refiring And Repair Of Sanitary Cermic Products

Abstract: This article introduces the key points and technical difficulties of using tunnel kilns for the re firing of sanitary ceramics, achieving simultaneous firing of sanitary ceramics in both primary and secondary firing.

2023.06.27

Quality Inspection Items for Ceramic Sanitary Ware Products

When ceramic manufacturing enterprises process and sell products, they usually need to inspect the appearance defects and functions of product quality.

2023.06.26

Toilet Manufacturer Reveals-Ceramic Sanitary Ware Firing Process

The kiln is an important facility for clay to be fired into porcelain at high temperature. Today we will take the tunnel kiln of our LORY Ceramic Sanitary Ware Factory as an example to explain the firing technology of the kiln in detail.1.Introduction to Tunnel Kiln.A tunnel kiln is a long, continuous kiln structure used for firing ceramic products. It consists of a tunnel-like chamber with a series of burners or heating elements positioned along its length.

2023.06.21

Toilet Manufacturer Reveals-Spraying Glaze Technology of Ceramic Sanitary Ware

Glazing is a process in which a thin layer of glass-like material, known as glaze, is applied to the surface of ceramic sanitary ware. The glaze is typically composed of various minerals, such as feldspar, quartz, clay, and metal oxides. It is applied to the ceramic ware to provide a decorative and protective finish. The glaze is applied in a liquid form, which solidifies during the firing process, creating a smooth, glossy surface.

2023.06.20

Toilet Manufacturer Reveals-Drying process of ceramic sanitary ware

In addition, after drying to remove most of the free water in the green body, the green body seldom shrinks, so that the green body can be heated up quickly during the firing stage without deformation or cracking of the product, so that ceramic manufacturers can ensure that The firing quality can also shorten the firing cycle, ultimately improving the utilization rate of the kiln and reducing energy consumption. Usually the moisture content of the green body should be dried to below 2% before entering the kiln.

2023.06.19

Toilet Manufacturer Reveals- The Grouting Process Of Ceramic Sanitary Ware

The grouting process in ceramic toilet manufacturing typically involves filling the gaps or joints between ceramic components with a specialized grout material. This process helps to enhance the structural integrity, aesthetics, and water-tightness of the toilet. Here's a detailed explanation of the grouting process for ceramic toilets:

2023.06.16