The structure of a siphon toilet is that the drainage pipeline is in a “s” shape.
After the drainage pipeline is filled with water, there will be a certain water level difference.
The suction generated by the flushing water in the sewage pipe inside the toilet will discharge the dirt.
Due to the fact that siphon toilet flushing does not rely on the force of water flow, the water surface inside the pool is relatively large and the flushing noise is relatively low.
Today, from the perspective of toilet manufacturers, siphon toilets are divided into two types: vortex siphon and jet siphon.: vortex siphon toilet and jet siphon toilet.
1. Vortex siphon
This type of toilet flush outlet is located on one side of the bottom of the toilet.
When flushing, the water flow forms a vortex along the pool wall,
which increases the flushing force of the water flow on the pool wall and also increases the suction force of the siphon effect,
making it more conducive to discharging dirt from the toilet.
2. Jet siphon
Further improvements have been made to the siphon style toilet by adding a spray secondary channel at the bottom of the toilet, aligning it with the center of the sewage outlet.
When flushing, a portion of the water flows out from the water distribution holes around the toilet seat, and a portion is sprayed out by the spray port.
This type of toilet uses a larger water flow force on the basis of siphoning to quickly flush away dirt.
Toilet manufacturers state that the advantages and disadvantages of siphon toilets are as follows:
Advantages:
The biggest advantage of a siphon toilet is its low flushing noise, which is called quietness.
In terms of cleaning ability, the siphon type is easy to flush out the dirt adhering to the surface of the toilet because it has a higher water storage capacity and better odor prevention effect than the direct flush type.
There are many types of siphon toilets on the market now, and buying a toilet will have more choices.
Disadvantage:
When using a siphon toilet to flush water, it needs to be drained to a very high surface before flushing the dirt down.
Therefore, a certain amount of water is required to achieve the purpose of flushing,which is relatively water intensive.
Lory toilet manufacturer stated that the diameter of the siphon type drainage pipe is only about 5-6 centimeters, which can easily block during flushing.
Therefore, toilet paper should not be directly thrown into the toilet.
Installing a siphon type toilet usually requires a paper basket and a scoop.
